Gain up to 22whp/29wtq
-94% Increase In Cooling Performance
-120% Larger Frontal Area Than OEM
-No Cutting or Trimming Required
The ARM F30 335i FMIC is the perfect cooling solution for any stock turbo or upgraded turbo N55 setup. With an intercooler core size of 20x11x3" and an overall volume of 660cu in. the ARM F30 FMIC is 235cu.in. or 36% larger than the stock N55 intercooler which comes in at only 425cu in. In addition, the ARM F30 FMIC utilizes an ultra-dense 14 fins per inch external core, giving it the best cooling performance possible.
With a 220sq.in. face the ARM F30 335i FMIC has a 120% larger frontal area than the OEM intercoolerwith only a 100sq.in face, and 55sq.in./33% larger than most aftermarket F30 intercoolers. Having a larger frontal area equates to more effective cooling compared to intercoolers of similar total volume. In the milliseconds that the ambient air passes through the intercooler it warms up, making the actual cooling less effective towards the rear of the intercooler. Taking the area towards the rear of the intercooler and bringing it towards the front improves the overall ability of the FMIC to cool the charged air on the N55. This is shown in our IAT testing results below.
Our baseline run was performed on a 335i running 16psi of boost with the stock F30 intercooler. The 3rd gear run started at 93 degrees and ended at 126 degrees, a huge increase of 33 degrees Fahrenheit on 16psi of boost, and certainly restricting the amount of power this N55 could have been making.
After installing the ARM F30 FMIC there was a massive improvement in cooling performance that resulted in only a 2 degrees Fahrenheit increase in IAT. In this 3rd gear run with boost peaking at 18psi, which is 2psi higher than the stock intercooler run, it starting at 95 degrees and ended at only 97 degrees. This is a 94% improvement in cooling over the OEM F30 intercooler!
Installation of the ARM F30 335i FMIC upgrade requires no cutting, trimming or removal of the front bumper or radiator shroud. It is a direct fit which bolts up into the original stock intercooler location. The CNC connectors will connect to either the stock F30 intercooler piping or to any upgraded intercooler piping that fits the stock intercooler.
F30 HOSE UPGRADE
If you're looking to improve the charged airflow and simplify your intercooler piping, the ARM Motorsports F30 FMIC Hose Upgrade comes included with both the ARM Charge Pipe upgrade and Turbo Outlet Pipe upgrade. This hose upgrade is designed to fit the ARM F30 Charge Pipe and Turbo Outlet Pipe upgrades respectively and eliminates the need for the stock F30 intercooler connections altogether. It reduces the total amount of connections by 50%, from 4 to 2 on the driver side, and 4 to 3 on the passenger side. The ARM F30 Charge Pipe is required to fit the ARM F30 FMIC Hose Upgrade.
BMW F30 335i - N55
2012 F30 335i / xDrive - N55
2013 F30 335i / xDrive - N55
2014 F30 335i / xDrive - N55
2015 F30 335i / xDrive - N55
BMW F32 435i/xDrive - N55
2014 F32 435i/xDrive - N55
2015 F32 435i/xDrive - N55
2016 F32 435i/xDrive - N55
BMW F22 235i/xDrive - N55
2014 F22 235i/xDrive - N55
2015 F22 235i/xDrive - N55
2016 F22 235i/xDrive - N55